Warex - WX2000 / DKZ 110 <APS> DN 250
Please contact us to request a price quote for Warex - WX2000 / DKZ 110 <APS> DN 250, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Technical information
| Manufacturer | Warex |
|---|---|
| Part number | WX2000 / DKZ 110 <APS> DN 250 |
| Inner Code | 3282019 |
| Description | butterfly valve |
| Custom code | 84818085 |
| Technical specification | Overall length 68 mm for clamping between flanges in accordance with EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 - with increased gap size - 1.4057 stainless steel shafts or higher Shaft sealing using O-rings Shaft bearing in PTFE carbon bushing Grey silicone sealing collar replaceable in the housing Can be pneumatically clamped against the flap disc < APS > The valve is equipped with the following special equipment: with built-in shaft extension, height 150 mm, for heat dissipation + Isoplan 750 flat gasket; 2 mm thick further attachments: pneumatic rotary drive AT 220 DR double acting required control pressure 6.0 bar APS control 2019 2-channel Tax Plan 10007632 without quick release valve, with pressure regulator 1/4" MS-Verz. throttle silencer mounting bracket F10, with pressure switch 3/2-5/2-way solenoid valve function Festo VSNC-FC-M52-MD-G14-FN Mat. No. 577267, 24 V DC, 0.7 watts, IP 65 Namur version with magnetic coil 8029144 with device plug 34583 Ambient temperature: -20... Ta... +60° C 3/2-5/2-way solenoid valve function Festo VSNC-FC-M52-MD-G14-FN Mat. No. 577267, 24 V DC, 0.7 watts, IP 65 Namur version with magnetic coil 8029144 with device plug 34583 Ambient temperature: -20... Ta... +60° C Limit switch box with 2 sensors P+F NBB2-V3-E2 3-wire, pnp, closer, 10-30 V DC, IP 67 built into the housing and wired to a terminal strip for position indicator Zu (upper sensor) + Open (lower sensor) incl. Retaining plate and screw connections Execution in accordance with tax plan No. 10007632 - however Apply nitrogen to APS seal + vent via on-site vacuum system - on-site vacuum line approx. Ø 1/2" |
| Weight: | 1 |