Wangen - KB20S 15.2S
Please contact us to request a price quote for Wangen - KB20S 15.2S, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Technical information
| Manufacturer | Wangen |
|---|---|
| Part number | KB20S 15.2S |
| Inner Code | 4968947 |
| Description | Pump |
| Technical specification | Pump size 15.2 The minimum supply volume is 30 l/h The maximum supply volume is 300 l/h Mounting position Horizontal, on a standard stand The temperature of the working fluid is not less than: 0⁰С - +40⁰С The direction of rotation (when viewed from the drive side) is left-handed Working pressure Not less than 10 bar Material V4A or equivalent Protection of the outer surface Standard modification Body seal material FKM or equivalent Rotor material AISI 316Ti / AISI 316L Stator material FKM, Shore hardness 71, steel body or equivalent Stator preservation Silicone-based grease Drive type cardan Suction pipe Rp 1.25" Position of the suction nozzle from above Discharge nozzle Rp 1.25" Drive of the starting mechanism Hydraulic motor The power of the hydraulic motor is not less than 0.75 kW Drive type DANFOSS OMP 25 OMP drive flange Drive shaft 25 The following components are provided in the product delivery set: Pressure-suction sleeve of the appropriate size, at least 6 m long, maximum working pressure at least 1.6 MPa 2 pieces Camlock type quick disconnects of appropriate size 4 pieces A set of spare parts for fast-wearing components and parts, 2 pieces Hydraulic engine of the appropriate capacity of the "herotorny" type, 1 piece Gear-type hydraulic motor of appropriate power 1 piece |