logo

Working hours:
Mon - Fri 09:00 - 17:00

Call Us:
+44 20 80899663

Tapflo - TX220AEE

Please contact us to request a price quote for Tapflo - TX220AEE, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.


WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Tapflo-TX220AEE price

Technical information

Manufacturer Tapflo
Part number TX220AEE
Inner Code 4686819
Description pneumatic diaphragm pump
Custom code 84135080
Technical specification Type TX220AEE ATEX certified Max. flow rate 330 l/min (with water) Max. delivery pressure 8 bar with 8 bar compressed air Suction height dry/filled 3.6 MWs/9 mWs Max. solid size 10 mm Max. temperature range -20ºC... +°C Aluminum center block (not affected by the product) Aluminum housing parts in contact with the product AISI 316L stainless steel valve seats EPDM membranes EPDM valve balls Suction/pressure connection G 1 1/2" internal thread (DN 40) Klingerseal/NBR seals Brass control valve, NBR ATEX certification II 2G Ex h IIC T6... T4 Gb; II 2D Ex h IIIC T60°C... T125°C Db Air consumption see conveying curve pump including muffler

Don't hesitate to contact us!

Looking for industrial spare parts?

Other Tapflo products

  • 5-222N-9125

    Impeller (90)ø 125 mm AISI 316LCTI CC

  • 5-340-152

    (Mechanical seal completely (15) Ceramic / graphite / FKM CTI C ../ D ../ E ..)

  • CTHAA-03

    Tapflo® Hygienic Centrifugal Pump Type CTHAA-03 Max. Flow 7 m³ / h Max. Discharge pressure 2.7 mWS Max. System pressure 9.5 bar Suction lift not self Max. Temperature 90 ° C Product wetted housing parts 316L stainless steel electro-polished Ra <0.8 microns Impeller stainless steel 316L electro-polished Ra <0.8 microns Lantern AISI 316L Mechanical seal single acting: Ceramic / graphite / EPDM (FDA) Housing O-Ring EPDM (FDA) Suction dairy fitting DIN 11851 DN 25 Pressure connection dairy fitting DIN 11851 DN 25 Drive: 230/400 V, 50 Hz, 0.37 kW, IP 55 Speed ​​2900 r / min at 50 Hz

  • T125 STS-3X40

    Pneumatic diaphragm pump housing: AISI 316L polished Membrane: PTFE valve balls AISI316 Connection: dairy pipe DIN 11851 DN40 01 1.00 pcs T125STS- 3x40 Capacity: Max. 125 l / min Pressure: max. 7 bar Product contact housing parts: 1.4404 (SS 316 L), polished Membranes: PTFE / EPDM, FDA approved Valve balls: AISI316L Suction and pressure connection: dairy pipe DIN 11851 DN40 Max. Operating temperature: 100 ° C, rapid CIP / SIP 125 ° C Max. Solid Size: 6 mm

  • TX120ANN

    Druckluftmembranpumpe

  • TRD20PTT

    air diaphragm pump

  • T100PEE

    Air Diaphragm

  • 6-100-15

    Membrane EPDM

  • 6-100-16

    Kolbenstange M 1.4571

  • 6-100-18

    O-Ring mit Dichtung EPDM

  • 6-100-222-22

    Universal PE valve seat insert

  • 6-100-23

    Valve ball EPDM

  • 6-100-25

    silencer

  • 6-050-27

    Sicherungsring Stahl

  • 6-050-30

    O-Ring Steuerventil NBR

  • 6-100-36

    Mittelblockdichtung PE

  • 6-100-43

    O-Ring Ventilsitz EPDM

  • 6-100-47

    O-Ring Mittelblockdichtung NBR

  • 6-050-61

    Control valve complete brass/NBR

  • Е164401

    for MN010-2 AISI

  • Е146901

    for MN013-2 AISI

Other Category Brands