Munk - D380 G22/15000 WR-PWX Similar to Com. 239.402/01-01
Please contact us to request a price quote for Munk - D380 G22/15000 WR-PWX Similar to Com. 239.402/01-01 , or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Technical information
| Manufacturer | Munk |
|---|---|
| Part number | D380 G22/15000 WR-PWX Similar to Com. 239.402/01-01 |
| Inner Code | 1858030 |
| Technical specification | High efficiency complete water cooled, fully electronic thyristor controlled high power anodising rectifier with water/water heat exchanger. The rectifier is integrated into a specially designed cabinet and is intended for remote control operation by means of the As 100 Main Components: • Mains contactor to disconnect all poles when the rectifier is in “off” mode • Ultra fast blow fused rated in accordance to the primary thyristor inverter stack • Advanced control electronics for the thyristor Inverter • μcontroller based monitoring and diagnosis System • Water-cooled, modular thyristor inverter with RC snubber circuit • Water-cooled, vacuum impregnated rectifier transformer • Water-cooled, modular diode rectifier with RC snubber circuit • Precise water-cooled DC measuring shunt, accuracy grade 0.5 Protection Devices: • hase failure Monitor • Phase unbalance Monitor • Mains under voltage Monitoring • Ultra fast blow mains fuses • Water flow Monitor • Temperature monitor for transformer, thyristors and diodes • DC over current Monitor Special feature X: 1) Water/Water heat exchanger to separate the cooling tower water circuit from the internal water circuit of the rectifier. 2) High inlet water temperature up to 30 °C - Reduced chillier capacity Technical Data: Mains voltage: 3 x 380 V / 50 Hz + PE complying with IEC 38 Mains current: 635 A Mains power: 419 kVA Efficiency: 0.90 or better Rated DC voltage: 22 V Rated DC current: 15000 A Duty factor: 100 % Ripple: < 7 % at full load Adjustment: approx. 0...100 % Control: constant current and voltage control Control accuracy: < 1 % Cooling: water cooling, open circuit Water flow: 3.2 m³/h Cooling water inlet temperature: 20 °C - 30 °C Cooling water outlet temperature: 30 °C - 40 °C Water quality: Chemically neutral without foreign substances according to the attached water specification Ambient temperature: up to 35 °C Site altitude: up to 1000 m above sea level Dimensions: W / D / H = 1200 / 1500 / 2000 mm Weight: 2300 kg Protection grade: IP 23 Surface finish: RAL 7035 |
| Weight: | 2300 |