Please contact us to request a price quote for Hbm - T22 1kNm , or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
| Manufacturer | Hbm |
|---|---|
| Part number | T22 1kNm |
| Inner Code | 4591505 |
Complete process controller for the monitoring of fitting tasks with powerful evaluation criteria and storage functions, 2-channel 4.8kHz carrier frequency measuring amplifier for SG and inductive transducers, +/- 10V signals, incremental encoders and SSI transducers, TEDS - Sensor identification, 0.1 accuracy, 0.05-1000Hz filters, ETHERNET interface, CAN interface, 5 control inputs, 8 control outputs, Rail mounting per DIN EN 50022, IP20 protection, 18-30 V DC supply voltage, Convenient control using FASTpressSuite setup and analysis software: PME Assistant(full version), EASYteach (demo version) And INDUSTRYmonitor (demo version) delivered free of charge on CDROM, incl. documentation, drivers and help
Universalmessverstärker
AC-DC Power Supply
PRESSURE SENSOR
pressure sensor
absolute pressure sensor
Absolute Pressure
Plattformwägezelle
4.8 kHz carrier frequency, for strain gauge transducer, inductive, piezoresistive and potentiometric transducers - 10-digit alphanumeric LCD display backlit ± 199,999 - in an ergonomically favorable desktop case with handle / tilt stand - Output ± 10 V, ± 20 mA or 4.20 mA - accuracy class 0.1 - digital filter of 0.05 to 1000 Hz - 4 adjustable limit values - 2 peak memory - 8 parameter memory - Analog output via BNC connector - serial RS-232-C to Settings and data for output of measured values - Power supply 230 V (115 V switchable) 48 - 60 Hz - incl. RS232 and power cord
platform load cell
Single platform load cell
connector kit
HBM Schraubmesswelle, nominal torque 10 Nm with strain gauge measuring system, accuracy class 0.1 built-in rotary encoder Tool Standard connections 10 F / G 10 according to DIN 3121 with 2 fixed mounted connection cables separately for torque u. angle of rotation 3 m long, with free ends
Torque transducer, rated torque 20 NmMesssignalübertragung about SchleifringeDMS measurement system accuracy: 0.1Elektrischer connection via plug introduction of torque on shaft stub (friction) torque output signal 2mV / VNenndrehzahl 4000U / min
Torque reference sensor
Reference torque measuring disc, nominal torque 5 kNm DMS measuring system Accuracy class: 0.05 Permanently mounted connection cable 3m, with free ends Torque transmission via flange Torque output signal 1.5mV / V
displacement transducer
Mitutoyo Mark Magnetblock HBM can not be produced
(load cell Rated load: 50kg Minimum division value: 0.0090% of Emax OIML R60 test report Accuracy: C3 Measuring body: Stainless steel Protection: IP68 according to EN 60529 Cable: Shielded 6-wire round cable with PVC Cable length: 3m)
SUB-D-Stecker
24 V 16 W
compressive force transducer
Anschlussstecker
8-channel USB measurement amplifier espressoDAQFamilie
including programming the memory contents of the TEDS TEDS Aufnehmersteck module is mounted.
Type HLM-20242 Output 1.8 millivolts load cell
Emax: 2.2 t, Emin: 0 kg, Limit: 3.3 t Vmin: 220 g, Cn; 1.94 mv/v; TC2163
