logo

Working hours:
Mon - Fri 09:00 - 17:00

Call Us:
+44 20 80899663

Hbm - K-HLC-A-C3-1100-N-S3- N- N

Please contact us to request a price quote for Hbm - K-HLC-A-C3-1100-N-S3- N- N, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.


WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Hbm-K-HLC-A-C3-1100-N-S3- N- N price

Technical information

Manufacturer Hbm
Part number K-HLC-A-C3-1100-N-S3- N- N
Inner Code 4670115
Custom code 90318080
Technical specification HLC-Load cell w ith options Strain gage system, sensitivity 1.94mV/V w ith fixed mounted cable, w ith free ends, degree of protection IP68 according to EN 60529. Mechanical version A HLCA1 Accuracy class C3 C3 OIML Maximum range 1100 1.1 t Explosion-proof protection N Without explosion-proof protection Standard S3 3m cable length Various N without TK0 009 Vmin= 0.009% Status/client N without

Don't hesitate to contact us!

Looking for industrial spare parts?

Other Hbm products

  • 1-P3MBP/50BAR

    absolute pressure sensor

  • 1-P8AP/200B-001

    Absolute Pressure

  • 1-PW16AC3/100KG-1

    Plattformwägezelle

  • 1-SCOUT55

    4.8 kHz carrier frequency, for strain gauge transducer, inductive, piezoresistive and potentiometric transducers - 10-digit alphanumeric LCD display backlit ± 199,999 - in an ergonomically favorable desktop case with handle / tilt stand - Output ± 10 V, ± 20 mA or 4.20 mA - accuracy class 0.1 - digital filter of 0.05 to 1000 Hz - 4 adjustable limit values - 2 peak memory - 8 parameter memory - Analog output via BNC connector - serial RS-232-C to Settings and data for output of measured values - Power supply 230 V (115 V switchable) 48 - 60 Hz - incl. RS232 and power cord

  • 1-SP4MC3MR/30KG-1

    platform load cell

  • 1-SP4MC3MR/75KG-1

    Single platform load cell

  • 1-SUBHD15-MALE

    connector kit

  • 1-T4WA-S3/10NM

    HBM Schraubmesswelle, nominal torque 10 Nm with strain gauge measuring system, accuracy class 0.1 built-in rotary encoder Tool Standard connections 10 F / G 10 according to DIN 3121 with 2 fixed mounted connection cables separately for torque u. angle of rotation 3 m long, with free ends

  • 1-T5/20NM

    Torque transducer, rated torque 20 NmMesssignalübertragung about SchleifringeDMS measurement system accuracy: 0.1Elektrischer connection via plug introduction of torque on shaft stub (friction) torque output signal 2mV / VNenndrehzahl 4000U / min

  • 1-TB1A/100NM

    Torque reference sensor

  • 1-TB1A/5KNM

    Reference torque measuring disc, nominal torque 5 kNm DMS measuring system Accuracy class: 0.05 Permanently mounted connection cable 3m, with free ends Torque transmission via flange Torque output signal 1.5mV / V

  • 1-WA/100MM-T

    displacement transducer

  • 1-WS/ZB 12 ALTERNATIF

    Mitutoyo Mark Magnetblock HBM can not be produced

  • 1-Z6FC3/50KG-1

    (load cell Rated load: 50kg Minimum division value: 0.0090% of Emax OIML R60 test report Accuracy: C3 Measuring body: Stainless steel Protection: IP68 according to EN 60529 Cable: Shielded 6-wire round cable with PVC Cable length: 3m)

  • 3-3312.0182

    SUB-D-Stecker

  • C2/50KN

    compressive force transducer

  • D-MONT

    Anschlussstecker

  • DQ809

    8-channel USB measurement amplifier espressoDAQFamilie

  • D-TEDS/MONT-DB

    including programming the memory contents of the TEDS TEDS Aufnehmersteck module is mounted.

  • HLC-40KN

    Type HLM-20242 Output 1.8 millivolts load cell

  • HLCB1C3 1,1

    Emax: 2.2 t, Emin: 0 kg, Limit: 3.3 t Vmin: 220 g, Cn; 1.94 mv/v; TC2163

  • HLCB1C3/4.4T

    Load cell

  • K-CAL-F-D-7-B-S-S

    (Calibration of the measured variable force in accordance with the HBM standard (without connector assembly). Traceability by DAkkS accreditation guaranteed by ISO 17025 or at factory calibrations (WCS) in Reference to ISO 10012 Calibration certificate in German and English Calibration type force DAkkS ISO 376, 8 steps Calibration power <= 1 MN Of load power tension and compression Number of measuring bridges Power Easy Bridge TEDS TEDS programming without programming)

  • K-CAL-T-W-1-B-S-S-2-0

    Calibration of the measured variable torque according HBM standard (Without connector or coupling assembly. Traceability through accreditation ISO 17025 (DKD) guarantees In DAkkS / DKD - calibrations optionally by: DIN 51309, EURAMET / cg-14, VDI2646 (Teilbereichskal. Not possible) DKD-R 3-5 (turning moment), or DKD-R 3-7 (transfer torque wrench). Factory calibrations (WCS) in relation to ISO 10012th Calibration certificate in German and English Calibration type torque WKS, 6 steps, 1 + 1 measurements Measuring range <= 200Nm Load direction right and left Moment Number outputs an output signal TEDS TEDS programming without programming 1. Signal output mV / V 2. Signal output 0

  • K-CAL-T-W-5-B-S-S-2-0

    Calibration of the measured variable torque according HBM standard (Without connector or coupling assembly. Traceability through accreditation ISO 17025 (DKD) guarantees In DAkkS / DKD - calibrations optionally by: DIN 51309, EURAMET / cg-14, VDI2646 (Teilbereichskal. Not possible) DKD-R 3-5 (turning moment), or DKD-R 3-7 (transfer torque wrench). Factory calibrations (WCS) in Terms of ISO 10,012th Calibration certificate in German and English Calibration type torque WKS, 6 steps, 1 + 1 measurements Measuring range <= 10kNm Load direction right and left Moment Number outputs an output signal TEDS TEDS programming without programming 1. Signal output mV / V

Other Category Brands