00190931 Erichsen - in England

Manufacturer	Erichsen
Part number	00190931
Inner Code	1616388
Description	Mehrschneidengerät 295/IX
Technical specification	Mehrschneidengerät 295/IX ausgestattet mit frei drehbarer Achse zwischen Handgriff und Prüfkopf, mit 6 Schneiden und Schnittabstand 1 mm für Gitterschnittprüfungen nach EN ISO, ISO, VDA und EN, inkl. Lupe, Polyamidborsten-Bürste und Kunststoffkoffer, inkl. Herstellerprüfzertifikat M
Weight:	0.9

00620531

Order number: 0062.05.31

FCCRF 0501

FCCRF 0505CA

GLANZMESSGERÄT PICOGLOSS 503

HÄRTEPRUFSTAB, MODELL 318

Hardness testing, model 318 incl. probe no. 1 (by Bosch, 0.75 mm Ø) and three springs Order Nr.0020.01.31

K HAND COATER 620 (LARGE)

Order number: 0620.02.51

K HAND COATER 620 (SMALL)

Order number: 0620.01.51

KUGELSCHLAGPRUFGERÄT MOD. 304

Falling weight: 2 pounds, Scale / division: 80/2 inch pounds, Ø ball / die: 5/8 "/ 0.64"

MEHRSCHNEIDENGERÄT 295/I

6 with cutting, cutting distance

MEHRSCHNEIDENGERÄT 295/I

6 cutting, cutting distance polyamide bristle brush and a plastic case

MODEL 291 - OBSOLETE, SUCCESSOR 0306.01.31 MODEL 293

MODEL 295 / V

Cutting element

MODEL 322

Diving flow cup in accordance with DIN ISO 2431 with nozzle diameter 6 mm

00200131 / Model 318

Scratch hardness

0096.01.31

Mar Tester

MODELS 295/II, 295 / X

Cutting element

MULTI CUTTING DEVICE 295 / I

with 6 blades and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA, EN, with magnifier, Polyamide bristle brush and plastic case

Mehrschneidengerät 295/I

6 with cutting, cutting distance

NASSSCHICHTDICKENMESSER 433

ISO 2808, BS 3900: C5 4 Part measuring ranges: 5-100 microns (5 microns scale division) 100-300 microns (10 microns scale division) 300-700 microns (20 microns scale division) 700 - 1500 microns (40 microns graduation

ORDER CODE: 0218.01.32

Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)

ORDER NO. 0004.01.31 SHEET METAL TESTING MACHINE, MODEL 100

with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

ORDER NO. 0012.01.31 MODEL 102 SHEET METAL TESTING MACHINE

with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)

ORDER NO. 0044.03.31

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)

ORDER NO. 0044.04.31

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 230 mm, gap heights + 150 microns 200 microns (please specify when ordering)

Order No. 0100.01.31 model 463

Sikkens scratching tool

Nr: 03010131, Modell 494 MC

Washability and scrubbing tester

ORDER NO. 0564.01.32

Probe for the model 295/XIV

910926442

Sikkens cutting egde