logo

Working hours:
Mon - Fri 09:00 - 17:00

Call Us:
+44 20 80899663

Erichsen - 0004.01.31

Please contact us to request a price quote for Erichsen - 0004.01.31, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.


WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Erichsen-0004.01.31 price

Technical information

Manufacturer Erichsen
Part number 0004.01.31
Inner Code 1644
Description Sheet Metal Testing Machine, Model 100 with manual operation, maximum drawing force 30 kN and compliance with the standard adjustable constant blank holding pressure max. 10 kN, with Tiefungsanzeige by counting with 0.1 mm Reading accuracy as well as a Test Tool No. 27 after EN ISO 20482, for testing the deep drawability of sheet metal and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength) in widths of 13-90 mm, by means of the Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE. Weight: approximately 36 kg net Dimensions: approx 340 x 350 x 450 mm (L x W x H)
Weight: 1

Don't hesitate to contact us!

Looking for industrial spare parts?

Other Erichsen products

  • Mehrschneidengerät 295/I

    6 with cutting, cutting distance

  • NASSSCHICHTDICKENMESSER 433

    ISO 2808, BS 3900: C5 4 Part measuring ranges: 5-100 microns (5 microns scale division) 100-300 microns (10 microns scale division) 300-700 microns (20 microns scale division) 700 - 1500 microns (40 microns graduation

  • ORDER CODE: 0218.01.32

    Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)

  • ORDER NO. 0004.01.31 SHEET METAL TESTING MACHINE, MODEL 100

    with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

  • ORDER NO. 0012.01.31 MODEL 102 SHEET METAL TESTING MACHINE

    with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)

  • ORDER NO. 0044.03.31

    Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)

  • ORDER NO. 0044.04.31

    Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 230 mm, gap heights + 150 microns 200 microns (please specify when ordering)

  • Order No. 0100.01.31 model 463

    Sikkens scratching tool

  • Nr: 03010131, Modell 494 MC

    Washability and scrubbing tester

  • ORDER NO. 0564.01.32

    Probe for the model 295/XIV

  • 910926442

    Sikkens cutting egde

  • ORDER.NO. 0062.02.31 MODEL 321

    Immersion flow cup with nozzle Ø 4 mm

  • 00980131 / P.I.G.,Modell 455

    Paint Inspection Gauge

  • 02610131

    Gloss Meter

  • RED DEVIL 392

    (Paint shaker (1400-0H-E5), for use as a dispersing machine for laboratory-color approaches for the determination of dispersion of pigments in accordance with DIN EN ISO 8780-2, to carry out mixing and Homogenisiervorgängen of all kinds, including holding brackets with flange. 2-arm device with lateral supports for receiving containers up to every 7 kg (about 5 liters) Total weight per working side, with the standard motor 5-1816 (1/4 hp) and a built-in mechanical timer (0 - 60 minutes), incl. cross foot and guard (complete chamber), designed according to the applicable EC directives. Power supply: 230 V, 50 Hz)

  • RITZHÄRTEPRUFGERÄT SCRATCH HARDNESS TESTER 413

    Base unit with electric motor (5 U / min) Rotary driven dish (Ø 115 mm) for clamping the test panels max. Dimensions 100 mm x 100 mm x 22 mm or Ø 140 mm x 22 mm. The package includes load arm for receiving the Test tool with a device for radial fine adjustment (Micrometer), 2 weights for the areas 1 N and 10 N, tare with dragonfly, circular level, hand magnifier, screwdrivers and carrying case. Power supply: 230 VAC / 50 Hz (other voltages on request)

  • SPEKTROMASTER 565

    COLOR AND GLOSS METER

  • TAUCH-AUSLAUFBECHER 321

    with nozzle diameter 4 mm

  • 0051.02.31

    Cylindrical Mandrel Bending Tester, Model 266 S

  • 0102.01.31

    SCRATCH HARDNESS TESTER 413

Other Category Brands