8LSA25.D9060S200-3 Br Automation

Manufacturer	Br Automation
Part number	8LSA25.D9060S200-3
Inner Code	4800210
Technical specification	gynchron motor; number of pole pairs: 4 pairs; Rated speed: 6,000 min-1 Standstill torque: 0.600 Nm; motor with holding brake; smooth shaft plug; angled (rotatable) single-cable solution; Centering diameter 40 mm; fit j6 self-cooled, type A; protection class IP64; without shaft sealing ring 560 VDC; brake holding torque: 2.20 Nm; D9 ind. EnDat 2.2 multit. 4096 rev.

2003 CPU with expansion, 750 KB SRAM, 1.5 MB FlashPROM, 24 VDC, 11.8 W supply, 1 RS232 interface, 1 CAN interface, CAN: electrically isolated, network capable, 4 slots for modules Enhancements: 1 PCMCIA slot, 1 insert slot for Interface Modules

7CP570.60-1

7CX404.50-1 REV. CO CX 404

7DM435.7

module

7DM465.7

2003 digital mixing module, 16 inputs 24 VDC, 1 ms, sink, 16 transistor outputs 24 VDC, 0.5 A, 2x TB718 terminal blocks separately Order

7DM465.7

2003 Digital Mixed Module, 16 inputs 24 VDC, 1 ms, sink, 16 transistor outputs 24 VDC, 0.5 A, 2x TB718 terminal blocks

7DM465.7

Ursprungsl. AT - Zolltarifnr. 85389091 2003 Digital Mixed Module, 16 inputs 24 VDC, 1 ms, sink, 16 transistor outputs 24 VDC, 0.5 A, 2x TB718 terminal blocks separately to order!

7DM465.7

2003 Digitales Mischmodul

7DO135.70

2003 digital output module, 4 FET outputs 12 to 24 VDC, 0.1 A, Matching module, 1x TB712 terminal block separately Order

7EX477.50-1 REV11.00 - OBSOLETE, REPLACEMENT 7EX477.50-2

plc module

7EX477.50-2

2003 Remote I / O Bus Controller 24 VDC, 14 W power supply 1 electrically isolated RS485 interface for coupling to the remote I / O bus

7EX481.50-1

7RF101.7 REV 21.21 - UNABLE TO ID.

plc module

80MPH4.500S000-01